HEP T5 24/39W Electronic Dimmable Ballast Single SD118-40
  • p1000021
  • p1000020

HEP T5 24/39W Electronic Dimmable Ballast Single SD118-40

T5 24/39W Electronic Dimmable Ballast Single




Item#: SD118-40
Manufacturer: HEP

In Stock



HEP T5 39W Electronic Dimmable Ballast Single

Automatic identification of lamp type.

Ignition with compulsory pre-heating within t 1sec in any dimming position.

Flicker-free dimming from 1% to100% of light flux.

Equipped with 1-10V control input, 250mA sink current.

Short circuit proof.

Open circuit safety.

Auto cutoff protection at lamp end-of-life.

Auto-reset after replacement of defective lamp.

Energy efficiency class EEI=A1.

EMC compliance with EN55015 (RFI suppression), EN61000-3-2 (Harmonics), EN61547,

EN61000-4-2,3,4,5,6,11(Immunity) .

ENEC KEMA certified acc. to EN61347 (Safety), EN60929(Operation).

ENEC KEMA certified acc. EN 60929: 2006, EN 61347-1:2001 + C1:2003,

EN 61347-2-3:2001+A1:2004+A2:2006, EN 55015.

Environmentally friendly components comply with RoHS.

Full Australian Approved


Hospitals, hotels, office buildings, road/tunnel lighting, airports, railway stations, cinemas,

conference rooms, department stores, museums.When regulating lamps observe their

admissible minus temperature.

Before regulating, burn in lamps without dimming at their full capacity for the duration

required by the lamp manufacturer.


Admin HEP

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register