Specially designed for Marine / Freshwater aquarium
The first filter of TRIO system enhances LEDs light sources and increases the luminance efficiency.
The second layer of TRIO absorb the light from filter and transform it into a more linear lightning source for the fish and corals.
The final stage of the lens reduce the glare produced by the LEDs creating a softer and user-comfortable lighting environment
- Utilizes high brightness LED, saves energy, has an extended longevity, outputs low temperature, and, with the addition of a patent optical layer, can enhance the LED light and uniformly distribute the light source into the aquarium.
- Able to adjust to any color for the entire spectrum of light to meet the demand of the aquatic life forms.(Sunlight Model Only)
- Meticulously engineered with a thermally efficient aluminum material and a high rotational fan to remove any problems formed with overheating issues.
- Adjustable RGB LED illuminative lights:(Sunlight Model Only)
a) Change the color of the aquarium according to the mood of the user with a specific color
b) Alter the wavelength to optimize the cultivating conditions of the aquatic life forms
c) Modify the LED to reflect vibrant colors off the fish scales of fluorescent fish, or arowana, etc.
- Traditional light source can affect the surface temperature of the aquarium, but LumenAQUA utilization of LEDs has minimal affect due to lack of temperature produced from the LED light.
- Protect the Earth from pollution! The regular light tube has traces of mercury coated on to its components and after discarding it, the bulb becomes a harmful pollutant to the Earth. LumenAQUA uses LEDs as its light source and it has no trace of mercury anywhere
FAQ
Question: Can LED lighting really replace high intensive Metal halide ?
Answer: Since the introduction of LED, LED has widely been used to replace Metal Halide lights and other fluorescent lightings in planting and cultivating both indoor and outdoor plants. LuemenAqua is designed to replace Metal Halide where high light intensity is required, whereas Oceanus Lighting is designed to replace other fluorescent lighting.
Question: What is the effect of LED light on Corals and Aquatic plant ?
Answer: Plant and Coral cultivating have been tested with success with LED light by many aquarium hobbyists. LumenAqua has been tested with success for SPS coral growth with a depth of at least 2 ft and LPS corals / Plants to a water depth of 3 ft.
Question: Will the LED lights generate any heats ?
Answer: LED do generate some certain amount of heat, but it is 60% lesser than other conventional lighting. Our LumenAqua high power LED lighting is cool by a in-built fan to exract heat out of the casing.
Question: Why is there only a few LED bulbs on the LumenAqua ?
Answer: With the use of the patented TRIO(Trio-Optical Layers) lens, it greatly reduces the affects of utilizing multiple LEDs within a lighting system to output a wider linear light source for the aquarium. This enables the lesser LED lights to spilt into a wider spectrum.
Question: Why is LED lighting more expensive than convectional Aquarium lighting ?
Answer: Some common LEDs are very cheap, but their light output is very low, and light output tends to diminishes quickly over time. A good high power LED and RGB LED bulb has higher light output and little light loss over time. The running cost is much lower since LED light has a average lifespan of 5 – 10 years.
Question: Does LED light enhance the color of the fishes and corals ?
Answer: LumenAqua has been proven to enhances vibrant color of fishes and corals. ect; Arowanna.
Question: LumenAqua LED lighting does not look brighter comparing to Metal halide lamp, is this as effective as a Metal Halide?
Answer: Lighting intensity in a Aquarium should be measured by PAR produce by the lighting, and out LEDs light produce more blue light than a Metal Halides which is required by corals. The human eye tends to see yellow and green lighting better than blue light which is the reason why the LEDs light may seem dimmer than the Metal Halides Lighting.
It is recommended for first time user to adjust the LumenAqua setting to 65% ~ 70% and slowly increasing the level over a few days to prevent beaching of corals. As corals need time to adjust to the strong lumen effect .
Question: How long do I need to replace the LEDs bulb ?
Answer: Generally, LEDs bulb tends to last between 5 to 11 years ( 50,000 Hours ) before putting in a new bank of lights. LEDs can run for up to 11 years. If you are running on a 12 hours a days, it is reported that there is only a slight reduction of light intensity of 30% after that period of 50,000 hours !! That would also means 70% of usable light is still available after 11 years!
Imagine the amount of the replacement bulbs which you can save each year comparing to convectional Aquarium lighting. Fluorescent bulb contains mercury and using lesser bulb help to save the environment as well.
Question: Does LED emit UV radiation ?
Answer: Comparing to a Metal Halide lighting which emit UV radiation, LEDs does not produce any form of UV radiation and thus prevent the lighting from beaching the corals.
Question: Does LuemAqua produce the same lighting effect as metal Halides ?
Answer: Yes. LumenAqua can produce the same flashing of sunlight or glitter lines effect in the tank like a Metal Halides.
Question: This is a great product, So how much energy can I save ?
Answer: Metal Halides tend to consume a lot of electricity and this can be expensive especially with the increasing electrical charges. LEDs lights uses 40% lesser power than an equal wattage metal halide and fluorescent lighting. Hence helping to save the environment by cutting down on energy consumption and replacing lesser bulbs while maintaining your hobby.
